18П-092_Сейсморозвідувальні роботи за технологією 2D, 3 лоти / 2D seismic survey, 3 lots

  • Ідентифікатор тендеру UA-2018-05-17-001430-a
  • 71352000-0 - Послуги у сфері розвідки надр
  • Завершена
Найменування замовника:
АТ "Укргазвидобування"
Тип закупівлі
Допорогові закупівлі
Контактна особа замовника
Ігор Захаров, +380444612959 , ihor.zakharov@ugv.com.ua
Адреса замовника
Україна, Киев, 04053, Київська область, вул. Кудрявська, 26/28
Дата укладення договору
21.08.18
Очікувана вартість
150 877 843 UAH з ПДВ
Сума договору
140 452 990 UAH
Оцінка умов закупівлі:
останні зміни 5.09.18
  • Відгуки 0
  • Інформація про тендер

Інформація про процедуру

Роз’яснення:

до 12.06.2018 12:00

Подання пропозицій:

21.06.2018 13:00

Очікувана вартість
150 877 843 UAH з ПДВ
Вид тендерного забезпечення:
Електронна банківська гарантія
Сума тендерного забезпечення:
754 388 UAH

Інформація про предмет закупівлі

Предмет закупівлі
71352000-0 – Послуги у сфері розвідки надр (Сейсморозвідувальні роботи за технологією 2D) 3 лоти / Services in the sphere of Mineral Exploration (2D seismic survey) 3 lots

Запитання до процедури

Source and receiver lines

Дата подання: 23.05.2018 08:36
Дата відповіді: 25.05.2018 14:21
Please clarify the meaning of “outermost source point” and “informative section of the line regarding geology data” and confirm the number of running kilometres for source and receiver lines. Please confirm, if seismic data acquisition without “receiver tails” is expected?

відповідь:

The geologically informative section of the line is the full fold section of the line. The outermost source points mean the first source point and the last source point.
The number of running kilometers for source and receiver lines is indicated in the Work (Geology) Specification (Annex 1 to the Contract).
Under the requirements of Work (Geology) Specification (Annex 1 to the Contract), the seismic contractor must use a central symmetric survey configuration. In this way, the survey methodology requires using “receiver tails”, and accordingly, the receiver lines must be longer than the source lines.

Sweep length

Дата подання: 23.05.2018 08:37
Дата відповіді: 25.05.2018 14:22
All bidders should provide their offers based on the same assumptions. Therefore, please provide sweep length, which should be considered for price quotation.

відповідь:

Under the Annex 5 to the Contract (Cost of Contractor’s work), the cost of work using vibration sources shall be determined based on the following parameters:
Six sweeps 14 sec. long.

Depth of uphole

Дата подання: 23.05.2018 08:38
Дата відповіді: 25.05.2018 14:22
Please specify the average and maximum depth of uphole, which should be considered for price quotation?

відповідь:

The maximum depth for the near surface survey (uphole depth) shall not be less than the thickness of the low velocity layer that can be 30-60 meters (average), depending on the area of work.

Nodal wireless system

Дата подання: 23.05.2018 12:37
Дата відповіді: 25.05.2018 14:22
Please confirm, whether a nodal wireless system with a single sensor for receiver is acceptable.

відповідь:

The Work (Geology) Specifications under the Lots require using 12 or more geophones (sensors) in the group.

Price reduction once Contract is signed

Дата подання: 24.05.2018 11:25
Дата відповіді: 30.05.2018 17:03
According to paragraph 4.11 of the draft of Contract - If the cost of Work of 2D reflection CDP seismic data acquisition (the total cost of the Stage 4 of Work and the cost of Work included in this stage) pursuant to the Cost Estimate prepared by Client that passed the expert evaluation with SGE Geolexpertisa is lower than cost of such Work under the Calendar Plan (Annex 2 hereto) and in cl. 4-6 of Annex 5 (Cost of Contractor’s work), then the cost of such Work and the respective price of the Contract shall be reduced pursuant to the Cost Estimate. The change of the price under the Contract and the cost of such Work shall be reflected in an Additional Agreement hereto signed by Parties in compliance with Ukrainian legislation. Prices for field operations reflect the costs of manpower, equipment, consumables, as well as taxes and other fees. Once the Contract is signed, no Contractor should be forced to reduce the prices based on an arbitrary evaluation of a third party. Please clarify.
Розгорнути Згорнути

відповідь:

The feasibility of applicable updates is subject to review.

Щодо Проекту робіт

Дата подання: 25.05.2018 11:36
Дата відповіді: 30.05.2018 17:03
Згідно пункту 7.3.3 Договору протягом 10-ти днів виконавець зобов’язаний провести організаційно-підготовчі роботи та приступити до виконання комплексу сейсморозвідувальних робіт, передбачених Проектом робіт, Календарним планом та Договором. Проектування являється першим етапом робіт, згідно Календарного плану, тобто через 10 днів після підписання Договору Проекту бути не може.
Розгорнути Згорнути

відповідь:

Доцільність внесення відповідних коректив буде розглянуто

Nodal wireless system

Дата подання: 28.05.2018 09:11
Дата відповіді: 30.05.2018 17:04
We suggest to compensate the decreased number of sensors in the receiver group by increased receiver point density, which improves CDP sampling density. The new proposed basic acquisition parameters are listed below: Receiver point interval 12.5 m (instead of 25 m) Number of active channels 520 (instead of 260) Acquisition of 2D CDP reflection seismic data at 6.25 m (instead of 12.5 m). Please specify if the offer prepared for modified parameters (listed above) and nodal wireless system with single sensor for receiver, is acceptable for the company?
Розгорнути Згорнути

відповідь:

The conditions indicated in the Work Specification ( Annexes 2.1-2.3 to the documentation) are the general requirements for all Participants of the procurement procedure. The 2D acquisition design may be updated after the testing.

Щодо зміни методики

Дата подання: 08.06.2018 16:27
Дата відповіді: 12.06.2018 09:43
В Технічному (геологічному) завданні на виконання сейсморозвідувальних робіт на Жденієвській площі за технологією 2D пунктом 3.3.3 Польові сейсморозвідувальні роботи передбачено виконання вибухових робіт з використанням 1-5 шпурів по 2-3 метри із зарядом 2-7 кілограм. Чи можливі зміни даної методики, якщо під час дослідно-методичних робіт з’ясується, що виконати роботи використовуючи вищенаведені параметри збудження не є можливим?
Розгорнути Згорнути

відповідь:

В Технічному (геологічному) завданні на виконання сейсморозвідувальних робіт на Жденієвській площі за технологією 2D пунктом 3.3.3 Польові сейсморозвідувальні роботи передбачено виконання вибухових робіт з використанням 1-5 шпурів по 2-3 метри із зарядом 2-7 кілограм. Чи можливі зміни даної методики, якщо під час дослідно-методичних робіт з’ясується, що виконати роботи використовуючи вищенаведені параметри збудження не є можливим?

Відповідь. Умови, вказані в Технічному (геологічному) завданні на виконання робіт є загальними для всіх учасників процедури закупівлі. Результати робіт мають повністю відповідати вимогам, наведеним в Технічному (геологічному) завданні та проекті Договору в цілому.
Розгорнути: 8 Згорнути

© 2016 Моніторинговий портал DoZorro. Всі права захищено

Необхідно авторизуватись

Необхідно авторизуватись

Помилка з'єднання